Ningjin Hengtai production of ceramic plate of good performance,high service life,full color,specifications can be produced according to customer demand,mainly to show the quality of our plant production efficiency than general ceramics cast stone is stronger,the following small simple introduces you to the next main characteristics of cast stone ceramics:

The 1.main components of high wear-resistant ceramic wool board for silica,alumina,zirconia,Magnesium Oxide,such as iron oxide,has excellent wear resistance,the wear degree is as low as 0.03g/cm2,is 3 times that of ordinary stone(0.09g/cm2),7-8 times of manganese steel,cast iron is 15-20 times.

2.corrosion resistant ceramics wool board has better corrosion resistance than acid brick,marble,granite,stone.It is both acid resistant and alkali resistant,especially in alternating acid and alkali environments.

3.impact ceramic wool board impact resistance is 5.5KJ/M2,is 3 times that of ordinary stone(1.57KJ/M2),far can meet the needs of most parts of the material conveying.

4.,the friction coefficient is low,the friction coefficient is only 0.05.The more smooth the surface is,the less the expansion bin and the material does not hang.

5.thin and light ceramic wool board thickness from 8 to 20mm,in most cases only use about 14mm thickness can meet the actual needs,the actual proportion of only 2.72,only 1/3 of steel,the relative increase in volume and reduce the cabin equipment and warehouse body weight.

6.can be cut on-site.

7.optimization index and technical parameter:

This article is selected as follows:http://www.njhengtai.com cast slab,microcrystalline cast slab